标题: 关于安卓Q Project Treble 升级 [打印本页]

作者: Only丶爱你    时间: 2019-5-16 16:28
标题: 关于安卓Q Project Treble 升级
In this post, we bring you the official Google’s GSI images based on Android Q. No need to worry if you don’t have the Pixel devices to try the Android Q initial features. This is why GSI is here. GSI means Generic System image. It can be installed on any Treble-enabled device, irrespective of the manufacturer they belong to. So, as of now google’s official GSI binaries are available which you can try on compatible devices. We have put up the download link for the GSi and the proper installation guide which you can use to flash the Android Q Beta GSI on Treble supported devices.
Keep in mind that as of now Android Q is in its developer preview beta so there are bugs. In case you, install the GSI on any Project treble compatible device, be ready to experience bugs. So, we don’t recommend to perform this modification unless you are testing this or use it as a daily primary driver.
Supported Devices and their bugs:Download Android Q Beta GSI
Here is the link we have put up to download the official Google’s GSI binaries based on Android Q.
How To Install Android Q Beta GSI..?
Before you start flashing the GSI based on Android Q, you have to keep in mind a few things which we have listed in the section below.
GetDroidTips will not be responsible for any hardware or software issues with your phone after installing the GSI Images. Modify your device at your own risk.

GSI Image Installation Guide
Step-1 Download the GSI image depending on your device architecture.
Step-2 Switch of your phone > Connect to PC/Laptop
Step-3 Go to the folder where you installed ADB. Right Click + Shift > Open PowerShell Window here.
Step-4 To enter bootloader give the command
adb reboot bootloader
Step-5 Now to disable AndroidVerified Boot give this command

fastboot flash vbmeta vbmeta.img
Step-6 Now perform a clean wipe of the system partition with this command
fastboot erase system
Step-7 Now you have to flash theGSI. So, give this command
fastboot flash system system.img
Step-8 Now you have to wipe out the user data partition
fastboot -w
Step-9 Now that flashing is done, you have to restart your device. So, give this command.
fastboot reboot
So, that’s it, guys. If you want to experience the Android Q for test purposes, then go install Android Q Beta GSI on Project Treble Supported devices. We hope this guide was useful to you.
搬运的帖子 不喜勿喷 原文地址:https://www.getdroidtips.com/install-android-q-beta-gsi/

作者: 烦人员工    时间: 2019-5-16 16:31
作者: 4515520    时间: 2019-5-16 16:47
作者: zzc葱头    时间: 2019-5-16 16:52
作者: Only丶爱你    时间: 2019-5-16 16:54
4515520 发表于 2019-5-16 16:47

大致意思就是 可以刷入通用包(GSI)来升级安卓Q
作者: Only丶爱你    时间: 2019-5-16 16:55
zzc葱头 发表于 2019-5-16 16:52

作者: 夏彼晨    时间: 2019-5-16 16:59
作者: 罢了咯    时间: 2019-5-16 17:02

作者: Only丶爱你    时间: 2019-5-16 17:14
罢了咯 发表于 2019-5-16 17:02

作者: Derekxxzzyy9793    时间: 2019-5-16 17:22
作者: qq1057253035    时间: 2019-5-16 17:23
作者: 木凝子    时间: 2019-5-16 17:30
作者: 黑逗yjl    时间: 2019-5-16 17:32
作者: kalamina    时间: 2019-5-16 18:04
作者: kalamina    时间: 2019-5-16 18:10

作者: Unkstal    时间: 2019-5-16 22:11
作者: Unkstal    时间: 2019-5-16 22:12
烦人员工 发表于 2019-5-16 16:31

作者: 007guilai    时间: 2019-5-16 22:34
作者: 刘晓渔    时间: 2019-5-16 23:36
作者: kalamina    时间: 2019-5-17 08:30
Unkstal 发表于 2019-5-16 22:11

作者: Only丶爱你    时间: 2019-5-17 10:20
Unkstal 发表于 2019-5-16 22:11

哪里有 感受如何

欢迎光临 MIUI论坛 (http://www.miui.com/) Powered by Discuz! X3